JB47 - MTB YOKE - 3D SLM PRINTED 316L - T47 50.8MM SHELL / 19MM STAYS - 29X 2.6 / 27.5 X 2.8 TIRE
THIS IS A SINGLE MTB YOKE THAT PROVIDES FOR SHORT REAR ENDS WITH LARGE TIRES AND GOOD CHAINRING CLEAREANCE TOOTH
DESIGNED BY JOE BEST AS A SOLUTION TO FIT THE REQUIRMENTS THAT NORMAL CHAINSTAYS HAVE LIMITATIONS WITH OUT DIMPLING. USING 3D PRINTED YOKES ALSO ALLOW FOR FAST FITUP AND GREAT ALIGMNET AS PARTS ARE PREMITERED TO BB SHELL AND 19MM STAY PLUGS KEEP THINGS IN PLACE.
SPECS: SEE SPEC SHEETS HERE FOR MORE INFO AND FITUP SHEETS CLICK HERE
3D PRINT SLM 316L - HEAT TREATED / PENETRATION TESTED / SAND BLASTED FINISH
T47 50.8 MM BB SHELL MITERED
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 50.8 MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 422mm + 29 X 2.8" @ 427mm + 27.5 X 2.8" @ 407mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
WEIGHT 125 FRAMS +/-3
SKU: FRM-Y3D-JB47V2-316
THIS IS A SINGLE MTB YOKE THAT PROVIDES FOR SHORT REAR ENDS WITH LARGE TIRES AND GOOD CHAINRING CLEAREANCE TOOTH
DESIGNED BY JOE BEST AS A SOLUTION TO FIT THE REQUIRMENTS THAT NORMAL CHAINSTAYS HAVE LIMITATIONS WITH OUT DIMPLING. USING 3D PRINTED YOKES ALSO ALLOW FOR FAST FITUP AND GREAT ALIGMNET AS PARTS ARE PREMITERED TO BB SHELL AND 19MM STAY PLUGS KEEP THINGS IN PLACE.
SPECS: SEE SPEC SHEETS HERE FOR MORE INFO AND FITUP SHEETS CLICK HERE
3D PRINT SLM 316L - HEAT TREATED / PENETRATION TESTED / SAND BLASTED FINISH
T47 50.8 MM BB SHELL MITERED
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 50.8 MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 422mm + 29 X 2.8" @ 427mm + 27.5 X 2.8" @ 407mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
WEIGHT 125 FRAMS +/-3
SKU: FRM-Y3D-JB47V2-316
THIS IS A SINGLE MTB YOKE THAT PROVIDES FOR SHORT REAR ENDS WITH LARGE TIRES AND GOOD CHAINRING CLEAREANCE TOOTH
DESIGNED BY JOE BEST AS A SOLUTION TO FIT THE REQUIRMENTS THAT NORMAL CHAINSTAYS HAVE LIMITATIONS WITH OUT DIMPLING. USING 3D PRINTED YOKES ALSO ALLOW FOR FAST FITUP AND GREAT ALIGMNET AS PARTS ARE PREMITERED TO BB SHELL AND 19MM STAY PLUGS KEEP THINGS IN PLACE.
SPECS: SEE SPEC SHEETS HERE FOR MORE INFO AND FITUP SHEETS CLICK HERE
3D PRINT SLM 316L - HEAT TREATED / PENETRATION TESTED / SAND BLASTED FINISH
T47 50.8 MM BB SHELL MITERED
STAY PLUGS TO FIT 19MM X .9 TUBING - USE SINGLE OR DOUBLE BEND STAYS AS NEEDED
BASED ON 73MM X 50.8 MM BB SHELL
TIRE AND CHAINSTAY + 29 X 2.6" @ 422mm + 29 X 2.8" @ 427mm + 27.5 X 2.8" @ 407mm
CHAINRING + 52mm CHAINLINE MIN.* DEISGNED FOR DIRECT MOUNT CHIANRINGS+ 34 TOOTH MAX.
CRANKSET + 162mm Q FACTOR MIN.
WEIGHT 125 FRAMS +/-3
SKU: FRM-Y3D-JB47V2-316
